IBC2011 Matroxの場合 [ショー/展示会]
MC-100という新製品を出すらしい。 BMDやAJAにあるようなミニコンを今更かと思ったが……
- Two SDI inputs and two SDI outputs for 3G, Dual Link, HD, and SD
- HDMI output for monitoring
- On-screen display controlled by easily accessible hardware buttons for straightforward configuration on HDMI and/or SDI monitors
- Multiformat SDI signal distribution
- SDI signal amplification – 300 meters in SD, 100 meters in HD, 70 meters in 3G
- Glitch-free switching between two HD-SDI feeds
- Loss-of-signal switching in case of invalid or lost input signal
- Multiplexing of two HD-SDI video signals into a single 3G-SDI feed
- Realtime 3D processing including Horizontal Image Translation (HIT) and vertical offset adjustments
- Industry-standard 3D analysis modes – Anaglyph, Difference, 50/50
- Comprehensive 3D output format support – Side-by-Side, Over/Under, Frame Packing (HDMI 1.4a)
- Video time-base corrector and frame synchronizer for 3D workflows
- 16 channels of embedded audio on SDI
- 8 channels of embedded audio on HDMI, selectable between the first and second set of four pairs
- Synchronization of both SDI inputs
- Convenient programmable dip switches for user-defined presets
- Power cord with locking connector
- Three-year hardware warranty and complimentary telephone support
興味を引かれたのが、3D関係。2系統で入力された3Dをハードウェアで重畳してくれるらしい。HDMIだとフレームパッキングまでしてくれる。更にフレームシンクロナイザー付き。これは普通の2Dカメラ2つからリアルタイムに3Dを作ってくれると考えてよいかな?だったら面白い。ついでにいうと逆のフレームパッキング分離もできると良かったかな。
Monitoring 3D content can be done on the HDMI or SDI outputs, with several analysis modes such as anaglyph, difference and 50/50. The signal can then be sent on a single SDI cable as a side-by-side or an over/under feed. On HDMI it can be sent in side-by-side, over/under, or frame packing (HDMI 1.4a) mode.
$495で10月発売らしい。
コメント 0